Identifying whether the excavator bucket teeth are seriously worn can be done in the following ways: Look for wear marks- Surface scratches and furrows: Carefully inspect the surface of the bucket teeth, if there is a clear furrowed scratch, and the scratch...

Regular detection of the wear of excavator bucket teeth can bring many benefits, as follows: Improve work efficiency- Timely replacement of worn bucket teeth: Through regular testing, the bucket teeth with serious wear can be found in time and replaced. The...

The heavy hammer crusher is a large crushing equipment integrating the advantages of Jaw Crusher, impact crusher, hammer crusher, box crusher and so on. The heavy hammer crusher can not only be used in the stone production line, sand production line, but als...

Excavator bucket teeth, as a key part of the excavator working device, are like the "sharp edge" in the field of construction machinery, and play a vital role in all kinds of excavation operations. It is directly in contact with soil, rock and other material...

Hot metal: refers to the fusion object in the furnace during the ironmaking process, that is, the mixture of iron alloy and molten steel.Ferrosilicon alloy: is an alloy used in steel smelting, the main components of silicon and iron.Ferrochrome: is an alloy ...

For the crusher, the working process of crushing is completed by the joint action of internal components. There are many kinds of crusher accessories, and the purchase also needs attention. But not all parts are involved in the crushing process, some parts a...

Vertical mill vibration greatly affects production! Analysis of 3 kinds of causes of vibration of vertical mill and 5 kinds of control measures With the continuous innovation of technology, vertical mill began to be applied to cement raw material grinding, ...

Jaw Plate is the main component of jaw crusher: dynamic jaw plate, static jaw plate, according to the type of jaw crusher is not the same, there are a variety of types of scale, red apple jaw plate selection of high manganese steel and ultra-high manganese s...

(1) Correct operation concept. In operation, we must consciously maximize the capacity of the roller press. For example, Φ140-65 roller press, its production capacity in 240~295t/h, if you need to provide 100t/h material to the ball mill system, the roll...

1, jaw crusher (also known as tiger mouth) : jaw crusher referred to as the jaw break, was developed and manufactured by the United States in 1858. Its main advantages are: suitable for hardness of hard and above material crushing, compared with other crushe...